Konica Minolta bizhub C200 Network Administration Manual page 35

Specifying network settings
3
Type in the IP address for the POP3 server, and then touch [OK].
– To specify a host name, touch [Host Name], and then type in the host name for the POP3 server.
– To change the port number, touch [Port], and then use the keypad to type in the desired port
number.
– [Host Name] appears only when "DNS Settings" is set to "YES".
4
Touch [POP3 User Name].
5
Type in the POP3 user name, and then touch [OK].
6
Touch [POP3 Password].
7
Touch [New Password], type in the POP3 password, and then touch [OK].
8
Touch [Confirm new Password], type in the POP3 password again, and then touch [OK].
9
Touch [Auto-RX Check].
bizhub C200
2
2-21