Specifying The Settings; Copying Settings; Specifying Settings For The Main Application (Mode 402); Factory Settings - Konica Minolta bizhub C200 Network Administration Manual

Specifying machine functions (software switch settings)
3.7

Copying settings

The software switch settings related to copying are described below.
Note
For details on Copy mode operations, refer to User manual – Copy Operations.
3.7.1

Specifying settings for the main application (mode 402)

Specify whether the machine will be used mainly with Copy mode operations or printing operations.

Factory settings

Factory settings
Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-3 -
2 Specify whether the machine will be used mainly with Copy
mode operations or printing operations.
1-0 -
3.7.2

Specifying settings for using Copy mode operations (mode 403)

Specify whether or not to allow the use of Copy mode operations.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-1 -
0 Specify whether or not to allow the use of Copy mode oper-
ations.
bizhub C200
7654 3210
0000 0100 (HEX: 04)
7654 3210
0000 0000 (HEX: 00)
Settings Details
00000 *Do not change the settings
for these bits.
0 Copy mode (After all com-
puter printing data is re-
ceived, it is printed
altogether.)
1 Computer printing (Compu-
ter printing data is printed as
it is received.)
00 *Do not change the settings
for these bits.
Settings Details
0000000 *Do not change the settings
for these bits.
0 Permitted
1 Not permitted
3
3-41