Ring Tone Pattern Selection - Panasonic KX-TDE100 Feature Manual

PT Programming Manual References
[205] Automatic Redial Repeat Times
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
1.3.58 Redial, Last Number
1.4.1 Call Log, Incoming

15.1.2 Ring Tone Pattern Selection

Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
1 280 ms
Single
Double
Triple
S-Double
* The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorized into three parts, each containing a specified number of pattern plans.
The ring tone pattern table is categorized as follows:
•
Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.
4.15 [2-8-1] Ring Tone Patterns—Call from CO
•
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone
•
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
4.17 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
Document Version 2009-12
15.1.2 Ring Tone Pattern Selection
Feature Manual 285