Panasonic KX-TDE100 Feature Manual page 299

® 13.1 [11-1] Main—RS-232C—
® [800] RS-232C Parameter—Parity Bit
e.
Stop Bit Length: Stop bit indicates the end of a bit string which composes a character. Select an
appropriate value depending on the requirements of the PC or printer.
® 13.1 [11-1] Main—RS-232C—
® [800] RS-232C Parameter—Stop Bit Length
•
If a call is transferred to an ICD group using Automatic Transfer, the condition code "TR" will not be recorded
on SMDR (® 3.1.10 Call Transfer).
[Host PBX Access Code]
•
The dialed number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a CO line port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require
a "0" to be dialed first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this case this PBX recognizes the telephone company as the host PBX. Therefore, only
long distance calls are recorded on SMDR.
[Output to a Telnet compatible Terminal Emulator]
•
In order to activate a connection to a terminal emulator, the IP address of the IPCMPR/IPCEMPR card,
port number, user ID ("SMDR"), and password must be entered.
•
If a terminal emulator user incorrectly enters the user ID or password 3 times consecutively, an alarm will
be sent and connection will not be possible for 10 minutes.
•
Through system programming, it is possible to assign the PBX port number and password.
•
The terminal emulator application must be running constantly. If the application is terminated, call records
that occur after the termination will be recorded in the PBX's memory. However, if the number of call records
exceeds the PBX's capacity, older records will be deleted. Also, when the application restarts or is
reconnected, duplicated call records may be output.
[Using SMDR with applications]
•
SMDR data can also be monitored by applications such as Panasonic Communication Assistant (CA). For
more information, see your application's documentation.
Installation Manual References
KX-TDE100/KX-TDE200
3.3.3 IPCMEC Card (KX-TDE0105)
3.10.1 Connection of Peripherals
KX-TDE600
3.3.3 IPCMEC Card (KX-TDE0105)
3.12.1 Connection of Peripherals
PC Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR—
8.2 [6-2] Hotel—Main—
13.1 [11-1] Main
→SMDR
Document Version 2009-12
Communication—Parity Bit
Communication—Stop Bit
SMDR for External Hotel Application 2—Printing Message 1–8
16.1.3 SMDR (Station Message Detail Recording)
Dial—Analog CO Call Duration Start
Outgoing CO Call Printout (SMDR)
Feature Manual 299