External Relay - Panasonic KX-TDE100 Feature Manual
Pure ip-pbx telephone systems
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (470 pages)
Table of Contents
Advertisement
5.1.8 External Relay
EXtra Device Port (XDP):
A Super Hybrid port can be used as an XDP port, allowing two telephones (a DPT and an SLT) to be connected
to the same port of the PBX. This XDP port can be used in one of the following modes:
Mode
Parallel Mode
XDP Mode
Conditions
•
Automatic Detection on Super Hybrid Port
A DPT, SLT, or PT-interface CS connected to a Super Hybrid port can be detected automatically without
any programming. An APT connected to a Super Hybrid port can be detected automatically when XDP
mode has been disabled.
•
A DSS Console or a Panasonic VPS which supports DPT (Digital) Integration can also be connected with
an SLT in XDP mode.
•
APT and SLT in Parallel Mode
An APT and an SLT can also be connected to a Super Hybrid port and used in parallel mode.
•
Digital XDP
A DPT can be connected to another DPT and act as an independent extension with its own extension
number. (® 13.1.2 Paralleled Telephone)
•
Wireless XDP Parallel Mode
A PS can be used in Wireless XDP Parallel mode with a wired telephone.
(® 20.1.5 Wireless XDP Parallel Mode)
•
DSS Console and Paired Telephone Assignment
When a DSS Console is connected, a PT must be paired with the DSS Console through system
programming.
PC Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port
6.17 [4-3] DSS Console—
PT Programming Manual References
[007] DSS Console Paired Telephone
[600] EXtra Device Port (XDP) Mode
5.1.8 External Relay
Description
By turning external device relays on and off, the PBX can control external devices such as alarms.
96
Feature Manual
The DPT and an SLT share the same extension number so that
they can act as one extension. The SLT uses the extension data
(extension number, Class of Service [COS], etc.) of the DPT. (®
13.1.2 Paralleled Telephone)
The DPT and SLT have different extension numbers and act as
independent extensions. To use XDP mode, XDP mode must be
enabled for the port through system programming. (®
13.1.2 Paralleled Telephone)
Pair Extension
Description
Document Version 2009-12
Advertisement
Table of Contents
