Doorphone Call - Panasonic KX-TDE100 Feature Manual

PT Programming Manual References
[207] Door Unlock Time
[512] Permission for Door Open Access
Feature Manual References
3.1.21 COS (Class of Service)
Operating Manual References
1.3.20 Door Open

4.1.12 Doorphone Call

Description
A visitor can use a doorphone to call its preprogrammed destination. Extension users can call a doorphone.
Conditions
•
Hardware Requirement:
An optional doorphone, the OPB card and DPH card
•
Call Destination
The destination of doorphone calls can be assigned to each doorphone port for each time mode. The Time
Table is determined by the tenant number assigned to each doorphone port. (® 17.1.5 Time Service)
The following destinations cannot be the destination for doorphone calls:
–
Floating Extension no. for SVM
–
DISA
–
Analog/ISDN Remote Maintenance
•
Class of Service (COS) programming determines the doorphone ports that are able to make an outgoing
CO line call.
•
Internal Call Block determines which extensions can call a doorphone. (® 9.1.14 Internal Call Block)
•
Ring Duration
If an incoming doorphone call is not answered within a preprogrammed time period, ringing stops and the
call is canceled.
•
Call Duration
The duration of doorphone calls can be restricted by a system timer. If the timer expires, the call will be
disconnected.
•
Door Open
While engaged on a doorphone call, an extension user can unlock the door to let the visitor in. (®
4.1.11 Door Open)
•
A doorphone number can be referenced for each doorphone port.
Installation Manual References
KX-TDE100/KX-TDE200
3.7.1 OPB3 Card (KX-TDA0190)
3.7.2 DPH4 Card (KX-TDA0161)
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
Document Version 2009-12
4.1.12 Doorphone Call
Feature Manual 87