Panasonic KX-TDE100 Feature Manual page 296

16.1.3 SMDR (Station Message Detail Recording)
Number in
the Pattern
(9)
(10)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Item
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
296 Feature Manual
Data
CD (Condition Shows other call information using the following codes:
Code)
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (® 13.1.6 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Controls whether outgoing CO line calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® 13.1 [11-1] Main—SMDR—
Call
® [804] SMDR Outgoing Call Printing
Controls whether incoming CO line calls are shown.
® 13.1 [11-1] Main—SMDR—
Call
® [805] SMDR Incoming Call Printing
Controls whether outgoing intercom calls are recorded.
® 13.1 [11-1] Main—SMDR—
Call
Controls whether the Log-in/Log-out status of extensions is
recorded.
® 13.1 [11-1] Main—SMDR—
Log-out
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.1.3 ARS (Automatic
Route Selection))
® 13.1 [11-1] Main—SMDR Options—
Description
Description
Print Information—Outgoing
Print Information—Incoming
Print Information—Intercom
Print Information—Log-in /
Option—ARS Dial
Document Version 2009-12