Panasonic KX-TDE100 Feature Manual page 188

11.1.3 Message Waiting
ON
Pattern 11
OFF
ON
Pattern 12
OFF
•
It is possible to leave a Message Waiting notification while hearing a ringback tone, busy tone, or DND
tone.
•
Messages are always left on the original destination extension, regardless of that extension's FWD settings.
(® 6.1.6 FWD (Call Forwarding))
•
Both the calling extension and the called extension can cancel a notification after it has been left.
•
If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
•
If a voice message has been left on the VPS for a SIP extension (except KX-HGT100), the lamp will not
turn on.
PC Programming Manual References
3.23 [1-1] Slot—Card Property - Extension Type—
4.9 [2-6-1] Numbering Plan—Main—Features—
4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature—
4.18 [2-9] System Options
→Option 3— Dial Tone—Distinctive Dial Tone
→Option 5— SLT—Message Waiting Lamp Pattern
5.21 [3-8-1] VM(DTMF) Group—System Settings—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8—
6.5 [4-1-4] Wired Extension—Flexible Button—
6.13 [4-2-3] Portable Station—Flexible Button—
6.17 [4-3] DSS Console—
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.42 Message Waiting
188 Feature Manual
10.24 s
t
t=1.28 s
10.24 s
t
t=1.28 s
Message Waiting Set / Cancel / Call Back
Type
Type
Type
10.24 s
10.24 s
SLT Power Supply
Message Waiting Set
VM DTMF Command—Listening Message
SLT MW Mode
20.48 s
20.48 s
Document Version 2009-12