Smdr (Station Message Detail Recording) - Panasonic KX-TDE100 Feature Manual
Pure ip-pbx telephone systems
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (470 pages)
Table of Contents
Advertisement
16.1.3 SMDR (Station Message Detail Recording)
•
Before a SIP extension can be used with the PBX, the IP address of the IPCMPR/IPCEMPR card,
password, and extension number must be assigned on the SIP extension and on the PBX.
For details on how to register, refer to the Information on IP Networking Guide.
•
When registering the SIP extension, the user ID must be the extension number of the SIP extension.
•
When a SIP extension uses the Call Hold feature, the target call is put on Consultation Hold.
Installation Manual References
KX-TDE100/KX-TDE200
3.4.1 Virtual Cards
KX-TDE600
3.4.1 Virtual Cards
PC Programming Manual References
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
3.19 [1-1] Slot—Port Property - Virtual SIP Extension Port—Connection Command
16.1.3 SMDR (Station Message Detail Recording)
Description
Automatically logs detailed information for each extension.
1.
SMDR Output Port
The following output methods can be selected through system programming:
13.1 [11-1] Main—SMDR—
Output Method
Serial Interface (RS-232C) port
Telnet compatible terminal emulator
2.
SMDR Output Data
The following data can be recorded and sent to the SMDR output port:
a.
CO line call information (incoming/outgoing)
b.
Intercom call information (outgoing)
c.
Log-in/Log-out information
d.
PBX error log (® 10.1.4 Local Alarm Information)
e.
Hospitality feature information (® 8.1.4 HOSPITALITY FEATURES)
f.
Printing Message information (® 13.1.13 Printing Message)
Memory for SMDR: A specified number of records (data) can be remembered by the PBX. When memory
is full, the oldest data is overwritten by new data.
When an IPCMEC card is installed, the number of SMDR records that can be stored will increase.
3.
SMDR Format Type and Contents
The following three types of output format can be selected through system programming:
292
Feature Manual
SMDR Format—Port
Description
SMDR information is sent to a connected PC, printer, etc.
SMDR information is sent to a Telnet compatible terminal
emulator via LAN.
Document Version 2009-12
Advertisement
Table of Contents
