Co Line Access - Panasonic KX-TDE100 Feature Manual

Feature Manual References
6.1.3 Flexible Buttons
Operating Manual References
1.3.52 Private Network Features—CLIP (Calling Line Identification Presentation)
1.3.53 Private Network Features—CLIR (Calling Line Identification Restriction)
1.3.55 Private Network Features—COLR (Connected Line Identification Restriction)

3.1.16 CO Line Access

Description
There are three methods of accessing a CO line.
Method
Idle Line Access (Local
Access)
Trunk Group Access
S-CO Line Access
Conditions
•
Class of Service (COS) programming determines the trunk groups available for making calls.
•
CO Line numbers can be referred on a CO line port basis.
•
Button Assignment
A flexible button can be customized as a G-CO, L-CO, or S-CO button as follows:
Type
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign:
–
the same CO line to the S-CO button and to a G-CO button.
–
the same trunk group to more than one G-CO button.
–
more than one L-CO button.
Dialing the CO Line Access number selects a CO button according to the following priority: S-CO ® G-CO
® L-CO
•
Direct CO Line Access
Document Version 2009-12
Description
Selects an idle CO line
automatically from the assigned
trunk groups.
Selects an idle CO line from the
corresponding trunk group.
Selects the desired CO line
directly.
Any trunk group that is made available for Idle Line Access through
system programming is applied.
A trunk group is assigned.
A specified CO line is assigned.
Operation
Dial the Idle Line Access number or
press a L-CO button.
Dial the Trunk Group Access number
and a trunk group number, or press a
G-CO button.
Dial the S-CO Line Access number
and the CO line number, or press the
S-CO button.
Assignable parameter
3.1.16 CO Line Access
Feature Manual 55