Panasonic KX-TDE100 Feature Manual page 212

13.1.6 PC Programming
Conditions
•
Only one system programming session is permitted at a time. Access will be denied when a second party
tries to perform system programming, including system programming via a PT.
•
Programmer Code and Password for System Programming
To access system programming, a programmer code and its password must be entered. For more details,
see Section 13.1.3 Password Security.
•
Remote Programming Limitation
It is possible to disable remote access through system programming. Disabling this feature will also disable
the ability to perform on-site programming via modem.
•
If an extension user sets Walking Extension at the same time that the extension's data is being programmed
through PC programming, the data may not be transferred properly. (® 20.1.2 Walking Extension)
Installation Manual References
KX-TDE100/KX-TDE200
3.3.1 IPCMPR Card
3.3.4 RMT Card (KX-TDA0196)
4.1 Overview
4.2 PC Connection
4.3 Installation of the Maintenance Console
KX-TDE600
3.3.1 IPCEMPR Card
3.3.4 RMT Card (KX-TDA0196)
4.1 Overview
4.2 PC Connection
4.3 Installation of the Maintenance Console
PC Programming Manual References
13.1 [11-1] Main
→RS-232C— External Modem Command—Automatic Initialization
→RS-232C— External Modem Command—Manual Initialization 1–Manual Initialization 5
→Remote
→Password—
→Password—
→Password—
PT Programming Manual References
[801] External Modem Control
[810] Remote Programming
[811] Modem Floating Extension Number
[812] ISDN Remote Floating Extension Number
Feature Manual References
4.1.6 DID (Direct Inward Dialing)
4.1.7 DIL (Direct In Line)
13.1.3 Password Security
212 Feature Manual
System Password - PC Programming—User Level
System Password - PC Programming—Administrator Level
System Password - PC Programming—Installer Level
Document Version 2009-12