Wireless Xdp Parallel Mode - Panasonic KX-TDE100 Feature Manual

20.1.5 Wireless XDP Parallel Mode

–
KX-DT300 series
–
KX-T7600 series
–
KX-T7400 series
–
IP-PT
•
If the Whisper OHCA feature cannot be used due to COS or telephone type, a call waiting tone will be sent
to the called extension. (® 3.1.12 Call Waiting Tone)
•
If the called extension does not use a KX-DT300, KX-T7600, or KX-T7400 series telephone or an IP-PT,
but forces Whisper OHCA, the announcement may be heard by the other party.
•
It is possible to enable Whisper OHCA on any telephone, however, it may not function properly (the
caller's voice may be heard by both callers, for example).
•
While an extension is receiving a Whisper OHCA, if the extension user places the current CO line call on
hold or transfers the current intercom call or CO line call, the Whisper OHCA will become disabled and the
calling extension will hear a ringback tone.
•
While an extension is receiving a Whisper OHCA, if the extension user places the current intercom call on
hold, the called extension can talk to the calling extension through the handset.
PC Programming Manual References
4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature
→ BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
4.12 [2-7-1] Class of Service—COS Settings—Extension Feature—
Feature Manual References
3.1.21 COS (Class of Service)
Operating Manual References
1.3.13 Call Waiting Tone
20.1.5 Wireless XDP Parallel Mode
Description
A portable station (PS) can be used in parallel with a wired telephone, i.e., a digital proprietary telephone (DPT),
analog proprietary telephone (APT), or single line telephone (SLT), allowing an extension user to make or
receive calls with either the wired telephone or the PS. The PS will use the same extension number as the
wired telephone, and many of the wired telephone's extension settings (Call Forwarding [FWD], Class of
Service [COS], etc.) are also used by the PS.
This mode is similar to XDP Parallel mode used to pair DPTs with SLTs. (® 5.1.7 Extension Port
Configuration)
In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.
364 Feature Manual
OHCA / Whisper OHCA
Document Version 2009-12