Viewing The Vpn Status - Cisco RV215W Administration Manual

Viewing the Device Status

Viewing the VPN Status

Viewing the VPN Status
Cisco RV215W Wireless-N VPN Firewall Administration Guide
The VPN page displays the status of VPN connections.
To view VPN user connection status, choose Status > VPN Status.
The VPN page displays this information:
Username
Remote IP
Status
Start Time
End Time
Duration (Seconds)
Protocol
You can change the status of a connection to either establish or disconnect the
configured VPN client.
To terminate an active VPN connection, click Disconnect.
The username of the VPN user associated with the
QuickVPN PPTP tunnel.
Displays the IP address of the remote QuickVPN client.
This could be a NAT/Public IP if the client is behind the
NAT router.
Displays the current status of the QuickVPN client.
OFFLINE means that the QuickVPN tunnel is not
initiated or established by the VPN user. ONLINE
means that the QuickVPN tunnel initiated or
established by the VPN user, is active.
Time when the VPN user established a connection.
Time when the VPN user ended a connection.
Duration of time between the VPN user establishing
and ending a connection.
Protocol that the user uses.
5
20