Viewing Default Values; Configuring Advanced Vpn Parameters; Managing Ike Policies - Cisco RV215W Administration Manual

Configuring VPN

Configuring Advanced VPN Parameters

STEP 6
STEP 1
STEP 2
Configuring Advanced VPN Parameters
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Click Save.

Viewing Default Values

The default values used in the basic VPN settings are those proposed by the VPN
consortium and they assume you are using a pre-shared key, or password, that is
known to both the device and the router on the other end (for example, a Cisco
RV220W). To view the default values:
Choose VPN > Basic VPN Setup.
Click View Default Settings to view the default values.
For more information on these values, see
Parameters.
The Advanced VPN Setup page allows you to configure advanced VPN
parameters, such as IKE and other VPN policies. These policies control how the
device initiates and receives VPN connections with other endpoints.

Managing IKE Policies

The Internet Key Exchange (IKE) protocol dynamically exchanges keys between
two IPsec hosts. You can create IKE policies to define the security parameters
such as authentication of the peer and encryption algorithms to be used in this
process. Be sure to use compatible encryption, authentication, and key-group
parameters for the VPN policy.
Choose VPN > IPsec > Advanced VPN Setup.
In VPN Policy Table, checking the box in the VPN connection row allows you to
perform the following tasks:
• Add Row or Edit—Edit properties of the IKE policy. See
IKE Policies.
Configuring Advanced VPN
Adding or Editing
9
106