Configuring Advertisement Prefixes - Cisco RV215W Administration Manual

Configuring Networking
Configuring IPv6
STEP 3
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
MTU
Router Life Time
Click Save.

Configuring Advertisement Prefixes

To configure the RADVD available prefixes:
Choose Networking > IPv6 > Advertisement Prefixes.
Click Add Row.
Enter this information:
IPv6 Prefix Type
MTU size (0 or 1280 to 1500). The default is 1500
bytes.
The Maximum Transmit Unit (MTU) is the size of the
largest packet that can be sent over the network.
The MTU is used in RAs to ensure all nodes on the
network use the same MTU value when the LAN
MTU is not well-known.
Router lifetime value or the time in seconds that the
advertisement messages exists on the route. The
default is 3600 seconds.
Choose one of the following types:
6to4—Allows IPv6 packets to be transmitted over
an IPv4 network. It is used when an end user wants
to connect to the IPv6 Internet using their existing
IPv4 connection.
Global/Local—A locally unique IPv6 address that
you can use in private IPv6 networks or a globally
unique IPv6 Internet address.
6
64