Configuring Optional Settings; Configuring A Mobile Network - Cisco RV215W Administration Manual

Configuring Networking
Configuring the WAN Settings
STEP 4
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Click Save.

Configuring Optional Settings

To configure optional settings:
In the Optional Settings section, configure the following settings:
Host Name
Domain Name
MTU
Size
Click Save.

Configuring a Mobile Network

Use the Mobile Network page to configure the device to connect to a Mobile
Broadband USB modem that is connected to its USB interface.
To display the Mobile Network window, choose Networking > WAN > Mobile
Network.
Host name of the device.
Domain name for your network.
The maximum transmission unit (MTU) is the size of
the largest packet that can be sent over the
network.
The standard MTU value for Ethernet networks is
usually 1500 bytes. For PPPoE connections, the
value is 1492 bytes.
Unless a change is required by your ISP, we
recommend that you choose Auto. The default
MTU size is 1500 bytes.
If your ISP requires a custom MTU setting, choose
Manual and enter the MTU size.
MTU size.
6
32