Editing Snmpv3 Users - Cisco RV215W Administration Manual

Administering Your Router
Configuring Simple Network Management (SNMP)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
To enable SNMP:
Choose Administration > SNMP.
Check Enable to enable SNMP.
Enter this information:
SysContact
SysLocation
SysName
Click Save.

Editing SNMPv3 Users

You can configure SNMPv3 parameters for the two default device user accounts
(Admin and Guest).
To configure SNMPv3 settings:
Choose Administration > SNMP.
Under SNMPv3 User Configuration, configure the following settings:
UserName
Access Privilege
Enter the name of the contact person for this
firewall (for example, admin or John Doe.)
Enter the physical location of the firewall (for
example, Rack #2, 4th Floor.)
Enter a name for easy identification of the firewall.
Select the account to configure (admin or guest).
Displays the access privileges of the selected user
account.
11
126