Cisco RV215W Administration Manual page 17

Wireless-n vpn firewall
Hide thumbs Also See for RV215W:
Table of Contents

Advertisement

Viewing the Device Status
Viewing the System Summary
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Click Refresh to obtain the latest information.
The System Summary page displays this information:
System Information
Firmware Version—Current software version the device is running.
Firmware MD5 Checksum—The message-digest algorithm used to verify
the integrity of files.
Locale—The language installed on the router.
Language Version—The version of the installed language pack. The
language pack version should be compatible with the currently installed
firmware. In some cases, an older language pack may be used with a newer
firmware image. The router will check the language pack version to see if it
is compatible with the current firmware version.
Language MD5 Checksum—The MD5 checksum of the language pack.
CPU Model—Chipset of CPU currently used.
Serial Number—Serial number of the device.
System Up Time—How long the system has been running.
Current Time—Time of day.
PID VID—Product ID and version ID of the device.
IPv4 Configuration
LAN IP—LAN IP address of the device.
WAN IP—WAN IP address of the device. You can release the current IP
address and obtain a new one by clicking Release or Renew.
Gateway—IP address of the gateway to which the device is connected (for
example, the cable modem).
Mode—Displays Gateway if NAT is enabled, or Router.
DNS 1—Primary DNS server IP address of the WAN port.
DNS 2—Secondary DNS server IP address of the WAN port.
DDNS—Indicates whether the Dynamic DNS is enabled or disabled.
5
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents