Cisco RV215W Administration Manual page 77

Configuring the Wireless Network
Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco RV215W Wireless-N VPN Firewall Administration Guide
• The guest network is configured as one of the four available SSIDs on the
device.
• The guest network cannot be configured on the AP Management VLAN
(VLAN ID 1).
To configure the guest network:
Create a New VLAN
In the Management Interface, choose Networking > LAN > VLAN Membership.
In the VLAN Setting Table, add a new VLAN for the guest network. For example,
click Add Row and enter the following:
• VLAN ID—Enter a number for the VLAN (for example, 4).
• Description—Enter a name for the VLAN (for example, guest-net).
Leave the ports as tagged and click Save.
Set Up the Guest Network
In the Management Interface, choose Wireless > Basic Settings.
In the Wireless Table, choose the SSID or network that you want to designate as
the guest network.
Click Edit. Change the SSID name to reflect the guest designation (for example,
guest-net ).
Check the SSID Broadcast box so that the network will appear as an available
wireless connection to clients searching for networks.
Check the Guest Network box to configure this SSID as the guest network.
Choose the VLAN you created for the guest network (or, if you have not yet
created a network, select Add New VLAN).
Click Save. The system notifies you that the physical Ethernet ports on the device
are excluded from the VLAN that you have assigned to the guest network. In
addition, Wireless Isolation with SSID and WMM are automatically enabled.
7
77