Configuration Next Steps; Using The Getting Started Page - Cisco RV215W Administration Manual

Introduction

Using the Getting Started Page

Using the Getting Started Page
Cisco RV215W Wireless-N VPN Firewall Administration Guide

Configuration Next Steps

Although Setup Wizard automatically configures the device, we suggest
customizing some settings to provide better security and performance:
• If you already have a DHCP server on your network and you do not want the
device to act as a network DHCP server, disable the server. See
the LAN Settings.
• Configure your Virtual Private Network (VPN) by using QuickVPN. QuickVPN
is included on the CD that shipped with your firewall. See
"Using the Cisco QuickVPN Software."
• The device supports up to four wireless networks. You can only set up one
wireless network (or SSID) by using Setup Wizard. To configure additional
wireless networks using Device Manager, see
Network.
The Getting Started page displays the most common device configuration tasks.
Use the links on this page to jump to the relevant configuration page.
This page appears every time you start Device Manager. To change this behavior,
check Don't show on start up.
Initial Settings
Change Default
Administrator Password
Launch Setup Wizard
Displays the Users page where you can change
the administrator password and set up a guest
account. See Configuring User
Launches the Setup Wizard. Follow the on-screen
instructions.
Configuring
Appendix A,
Configuring the Wireless
Accounts.
4
11