Cisco RV215W Administration Manual page 41

Configuring Networking
Configuring the LAN Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
To create a VLAN:
Choose Networking > LAN > VLAN Membership.
Click Add Row.
Enter this information:
VLAN ID
Description
Inter VLAN Routing
Port 1
Port 2
Port 3
Port 4
Click Save.
To edit the settings of a VLAN, select the VLAN and click Edit. To delete a selected
VLAN, click Delete. Click Save to apply changes.
Numerical VLAN ID to assign to endpoints in the VLAN
membership. The number you enter must be between
3 to 4094. VLAN ID 1 is reserved for the default VLAN,
and is used for untagged frames received on the
interface.
A description that identifies the VLAN.
Allows an end station in one VLAN to communicate
with an end station in another VLAN.
You can associate VLANS on the device to the LAN
ports on the device. By default, all LAN ports belong to
VLAN1. You can edit these ports to associate them
with other VLANS. Choose the outgoing frame type for
each port:
Untagged—The interface is an untagged member of
the VLAN. Frames of the VLAN are sent untagged to
the port VLAN.
Tagged—The port is a tagged member of the VLAN.
Frames of the VLAN are sent tagged to the port VLAN.
Excluded—The port is currently not a member of the
VLAN. This is the default for all the ports when the
VLAN is first created.
6
41