Setup - YASKAWA NX100 Instruction Manual

15.3 Setup

The Interbus-S slave can run on either 500 kbit/s or 2 Mbit/s. The setting is made by switching a
jumper on the card when the card is unpowered.
Referring to image below:
• Moving the jumper to the A-side sets baudrate 2 Mbit/s
• Moving the jumper to the B-side sets baudrate 500 kbit/s
Fig. 67 Switching baudrate: 500 kbit/s or 2 Mbit/s
Reg.No. ME00107EN-02
Fieldbus PCI-Card
Setup
A
B
Page 71