YASKAWA NX100 Instruction Manual page 62

Fieldbus PCI-Card
Network setup
Fig. 48 Error:12
To edit a connection in the list, just click on that row. To add a connection press [Add]. To delete a
connection select row and press [Delete]. See Fig. 47 Anybus Master EtherNet/IP 2.
Example below shows connection 5 bytes from an AnyBus Ethernet/IP adapter. Please note the
instance numbering:
Fig. 49 Scanlist configuration
Note
The sum of all Originator->Target is not allowed to be greater than 505 bytes and the sum of
all Target ->Originator is not allowed to be greater than 509 bytes. See Fig. 49 Scanlist
configuration. Be sure not to set greater values or addresses outside these limits.
Page 56 Reg.No. ME00107EN-02