Principle Of Input/Outputs In Asi; Configuration Interface - YASKAWA NX100 Instruction Manual

9.3

Principle of Input/Outputs in ASI

Note
For every Input or Output in ASI the respective Input/Output will be allocated (blocked).
The Inputs/Outputs of the nodes in an ASI fieldbus system can be set up as in following example:
I/O NO:
25-32
33-36
37-40
41-44
45-48
49-52
9.4

Configuration interface

This interface provides a simple text based interface via the onboard RS232 interface. All network
configuration parameters are available using a standard terminal emulator such as the windows
Hyperterminal.
Note
No data exchange is halted and no mailbox activity is possible while using this interface.
Terminal emulation:
Baudrate:
Databits:
Stopbits:
Parity:
Flow control:
Reg.No. ME00107EN-02
Function
8 bits of system status
4 bits of system status
4 bits of data input
4 bits of data output
4 bits of data input
4 bits of data output
4 bits of data input
4 bits of data output
4 bits of data input
4 bits of data output
ASCII
38400
8
1
None
None
Fieldbus PCI-Card
Principle of Input/Outputs in ASI
Comment
For NX100 specific fieldbus status
data
For ASI fieldbus system internal
status data.
Always 4 first bits of the first node in
ASI.
Node 1
Node 2
Node 3
Node 4
Page 41