Cli Error Messages - Proxim ORiNOCO AP-700 User Manual

Command Line Interface (CLI)
General Notes
Key Combination
Tab
?

CLI Error Messages

The following table describes the error messages associated with improper inputs or expected CLI behavior.
Error Message
Syntax Error
Invalid Command
Invalid Parameter Name
Invalid Parameter Value
Invalid Table Index
Invalid Table Parameter
Invalid Table Parameter Value An invalid table parameter value has been entered at the command prompt.
Read Only Parameter
Incorrect Password
Download Unsuccessful
Upload Unsuccessful
Operation
Complete the command line
List available commands
Invalid syntax entered at the command prompt.
A non-existent command has been entered at the command prompt.
An invalid parameter name has been entered at the command prompt.
An invalid parameter value has been entered at the command prompt.
An invalid table index has been entered at the command prompt.
An invalid table parameter has been entered at the command prompt.
User is attempting to configure a read-only parameter.
An incorrect password has been entered in the CLI login prompt.
The download operation has failed due to incorrect TFTP server IP Address or file
name.
The upload operation has failed due to incorrect TFTP server IP Address or file
name.
Description
AP-700 User Guide
181