Proxim ORiNOCO AP-700 User Manual page 92

Advanced Configuration
Filtering
Figure 4-36 TCP/UDP Port Filter Configuration
2. Click Add under the TCP/UDP Port Filter Table heading.
3. In the TCP/UDP Port Filter Table
4. Set the destination Port Number (a value between 1 and 65535) to filter. See the IANA Web site at
http://www.iana.org/assignments/port-numbers
5. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).
6. Set the Interface to filter:
• Only Ethernet
• Only Wireless
• All interfaces
7. Click OK.
enter the Protocol Names to filter.
,
for a list of assigned port numbers and their descriptions.
AP-700 User Guide
92