System Status - Proxim ORiNOCO AP-700 User Manual
Hide thumbs
Also See for ORiNOCO AP-700:
- User giude (222 pages) ,
- User manual (221 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
System Status
The first screen displayed after
the Status button.
Figure 3-1 System Status Screen
The System Status screen provides the following information:
•
System Status: This area provides system-level information, including the unit's IP address and contact information.
See
System
for information on these settings.
•
System Alarms: System traps (if any) appear in this area. Each trap identifies a specific severity level: critical, major,
minor, and informational. See
NOTE: On APs with model numbers ending in -WD, an operating Country must be selected (during the Setup Wizard
or on the Configure > System tab). If a country has not been selected, an informational message will appear
in the System Alarms list, and you will be unable to configure interface parameters.
From this screen, you can also access the AP's monitoring and configuration options by clicking on the buttons on the
left of the screen.
Logging In
is the System Status screen. You can always return to this screen by clicking
Alarms
for a list of possible alarms.
AP-700 User Guide
3
36
Advertisement
Table of Contents
