Proxim ORiNOCO AP-700 User Manual page 58

Advanced Configuration
Interfaces
Figure 4-13 DCS Trap Message
The Access Point monitors the current channel for interference and errors. The DCS Threshold controls how
aggressively the Access Point changes the channels. The lowest value of the DCS Threshold is 1 which means channel
switch would happen even for minimum interference and the highest value (10) means the channel has to be significantly
bad. A value of "10" in the DCS threshold dropdown indicates a less Aggressive system and "1" indicates a high
aggressiveness index. Higher the value is lesser the Agressive Index showing an inversely proportional ratio.
AP-700 User Guide
58