Update Ap; Update Ap Via Tftp - Proxim ORiNOCO AP-700 User Manual

Commands

Update AP

Update AP

Update AP via TFTP

Use the Update AP via TFTP tab to download Configuration, AP Image, Bootloader files, Certificate and Private Key files,
and CLI Batch File to the AP. A TFTP server must be running and configured to point to the directory containing the file.
Figure 6-2 Update AP via TFTP Command Screen
If you do not have a TFTP server installed on your system, install the TFTP server from the installation CD. You can either
install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
The Update AP via TFTP tab shows version information and allows you to enter TFTP information as described below.
• Server IP Address: Enter the TFTP server IP Address.
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
NOTE: This is the IP address that will be used to point the Access Point to the AP Image file.
• File Name: Enter the name of the file to be downloaded (including the file extension).
– Copy the file to the TFTP server's root folder.
• File Type: Select the proper file type. Choices include:
– Config: configuration information, such as System Name, Contact Name, and so on.
NOTE: The AP will reboot automatically when downloading a Config file.
– Image: AP Image (executable program).
– Upgrade BspBl: Bootloader software.
– SSL Certificate: the digital certificate for authentication in SSL communications.
– SSL Private Key: the private key for encryption in SSL communications.
– SSH Public Key: the public key in SSH communications. See
– SSH Private Key: the private key in SSH communications. See
Secure Shell (SSH) Settings
Secure Shell (SSH) Settings
AP-700 User Guide
for more information.
for more information.
158