Mounting The Engine - Seagull Models Funfly 3D Assembly Manual

SEAGULL FUNFLY 3D.
12
Instruction Manual.

MOUNTING THE ENGINE.

1) Position the engine with the drive washer
(110mm) forward of the firewall as shown.
2) Use a pin drill and 2mm drill bit to drill a
small indentation in the mount for the engine
mounting screw.
110mm.
3) Use a drill to drill the four holes in the engine
mount rails.
2mm.
4) On the fire wall has the location for the
throttle pusshrod tube (pre-drill).
Pushrod tube hole.
2mm.