Microscan MS-4Xi User Manual page 9

Warning and Caution Summary
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
LED Output: .564 mW. Wavelength: 470 nm; 525 nm; 617 nm.
• Viewing the MS-4Xi's LED output with optical instruments such as magnifiers, eye
loupes, or microscopes within a distance of 100 mm could cause serious eye injury.
• Maximum LED output: .564 mW.
• Wavelength: 470 nm; 525 nm; 617 nm.
• Location of the MS-4Xi's LED aperture window:
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
IMPORTANT: The MS-4Xi is intended for connection to a UL-listed direct plug-in power unit
marked Class II and rated 24 VDC at 5 Watts, or greater if using electrical accessories.
European models must use a similarly rated Class I or Class II power supply that is certified
to comply with standard for safety EN 60950.
WARNING: Baseplate temperature may exceed 70° C at maximum operating
temperature and may cause burns. Use caution when handling.
MS-4X Imager User Manual
WARNING
LED LIGHT
CLASS 1 LED PRODUCT
IEC 60825-1:1993+A1:1997+A2:2001
LED Aperture Window
Introduction
ix