Table of Contents
Advertisement
Database Identifier Output
Usage:
Useful in keeping track of which database entries read which symbols.
Serial Cmd:
<K759,status,separator>
Default:
0
Options:
0 = Disabled
Output Status
Disabled
When this command is disabled, no database identifier information will be output.
Enabled
When this command is enabled, the imager will append a two-digit number and the characters
"DB" to the data output following the separator for each symbol decoded using Configuration
Database. For example, if the separator is an underscore character and the second database
entry reads a symbol encoded with "data capture" during the read cycle, the symbol data
output will be "data capture_DB02". If the database is not active, no identifiers will be
attached to output.
Separator
The separator character separates the symbol data from the database identifier.
Usage:
Serial Cmd:
<K759,status,separator>
Default:
<space>
Options:
Any ASCII character.
Important: The ASCII characters <, >, and
For <:
<K759h,,3C>
For >:
<K759h,,3E>
,
For
:
<K759h,,2C>
MS-4Xi Imager User's Manual
1 = Enabled
,
can only be entered as hex pairs:
I/O Parameters
7-39
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-4Xi and is the answer not in the manual?
Questions and answers