Initiating Calibration - Microscan MS-4Xi User Manual

Initiating Calibration

Initiating Calibration

Calibration can be initiated by serial command, the EZ button, or from the Calibration
interface in ESP. A symbol must be in the imager's field of view during the calibration process.
In ESP, the Calibrate button starts the calibration routine.
To initiate calibration by serial command, enter the serial command
such as ESP's Terminal interface.
and readability.
See Calibrate by EZ Button
4-12
<@CAL> is a calibration routine that emphasizes contrast
for the EZ button calibration procedure.
<@CAL> from a terminal,
MS-4Xi Imager User's Manual