Step 2 Connect The System - Microscan MS-4Xi User Manual

Step 2 — Connect the System
Ethernet Standalone without QX-1
• Connect the M12 (power and I/O) end of the imager's cable to the power supply (3).
• Connect the RJ45 (Ethernet) end of the imager's cable to the host.
• Plug in the power supply to apply power to the imager.
Ethernet Standalone with QX-1
• Connect the M12 (power and I/O) end of the imager's cable to "2" on the QX-1 (2).
• Connect the RJ45 (Ethernet) end of the imager's cable to the host.
• Connect the power supply (3) to "3" on the QX-1.
• Connect the photo sensor (4) to "T" on the QX-1.
• Plug in the power supply to apply power to the imager.
3
Ethernet Standalone without QX-1
Caution: Be sure that all cables are connected BEFORE applying power to the
system. Always power down BEFORE disconnecting any cables.
MS-4Xi Imager User's Manual
1
2
3
4
Ethernet Standalone with QX-1
Quick Start
1
1-3