Read Cycle Serial Commands - Microscan MS-4Xi User Manual

Read Cycle Serial Commands

Trigger Mode/Filter Duration <K200,trigger mode,leading edge trigger filter,trailing edge
Serial Trigger Character
External Trigger State
End of Read Cycle
Minimum Good Reads
Multisymbol
Start Trigger Character
Stop Trigger Character
Capture Timing
Image Storage
Image Processing Timeout <K245,image processing timeout>
MS-4Xi Imager User's Manual
trigger filter>
<K201,serial trigger character>
<K202,external trigger state>
<K220,end of read cycle,read cycle timeout>
<K221,minimum good reads>
<K222,number of symbols,multisymbol separator>
<K229,start character>
<K230,stop character>
<K242,time before first capture,time between first and second
captures,,,,,,,,time between seventh and eighth captures>
<K244,image storage type,image store mode>
Read Cycle
5-3