Table of Contents
Advertisement
Ethernet
TCP Port 2
One of two TCP ports for Ethernet communication with the imager. The default setting is 2003.
Symbol Data Output
Enables or disables decoded symbol data output from the imager.
Extra Symbol Information
Enables or disables extra symbol information output from the imager.
Diagnostics Output
Enables or disables diagnostics output from the imager.
External Source Processing Mode
Enables or disables processing of commands or data from sources external to the imager.
Command
Command enables command processing in the imager.
Data
Data enables Ethernet TCP Port 2 as a data source port.
Note: The data path between in the source port and out the source port is always two-way.
Data is copied from source data ports and all those source ports' data is transmitted to the
destination port, and from the destination port to the source port.
3-12
MS-4Xi Imager User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-4Xi and is the answer not in the manual?
Questions and answers