Slider Removal - Ricoh FT2050 Field Service Manual

Slider Removal

1. Remove the platen cover.
2. Remove the upper rear cover,
3. Remove the harness from the 2 clamps.
4. Remove the drive wire bracket (1 screw and 1
connector) together with the slider lock lever,
slider release lever, and slider lock spring.
5. Remove the slider drive wire together with the
slider drive pulley (1 wire spring).
NOTE: * Position the slider lock notch just above
the slider drive pulley so that the slider
drive pulley can be removed.
6. Remove the slider stopper, move the slider to
the left, and then remove.
NOTE: * For re-installation, see "Slider Drive Wire
Replacement" section.
* Be careful not to damage the actuator of
the home position switch when re-
installing the slider.
August 1, 1985
I
5-7