Updating The Firmware; Updating Firmware Using Extron Firmware Loader - Extron electronics TouchLink TLP 710MV User Manual

5.

Updating the Firmware

Firmware for both touchpanels can be upgraded using the
using
consult your IT team and ensure that the touchpanel has a unique IP address.

Updating Firmware Using Extron Firmware Loader

1.
2.
Click the Touchpanel tab, which allows the user to alter the touchpanel and volume
settings. These correspond to the
(see page 15) in the on-screen menus.
Figure 22. Touchpanel Configuration Page
the TLP 710 default web
Power on a computer that is connected to the same network as the touchpanel.
Install the Extron Firmware Loader utility onto the computer if it is not already present.
This is on the software disc that ships with unit or can be downloaded, free of charge,
from the Extron website (www.extron.com).
To install from the disc, insert the disc into the DVD-ROM drive of the computer
and follow the same procedure as
Configurator" (see page 18).
To install from the Extron website (www.extron.com), select the Download tab and
then the Software tab. Locate the Firmware Loader and click Download. Follow the
on-screen instructions to complete installation.
Main settings
(see page 14) and
page, or using GUI Configurator. Before starting,
"Installing GUI Configurator and Global
TLP 710MV and TLP 710TV • Configuration Software
Volume settings
Extron Firmware Loader,
21