Table of Contents
Advertisement
4.
5.
Updating the Firmware
Firmware for both touchpanels can be upgraded using the
using
consult your IT team and ensure that the touchpanel has a unique IP address.
Updating Firmware Using Extron Firmware Loader
1.
2.
To upgrade the firmware, select
see
Updating Firmware from a Web Browser
Click the
tab to access the Touchpanel Configuration page, which allows
Touchpanel
the user to alter the touchpanel and volume settings. These correspond to the
settings
(see page 14) and
Touchpanel Configuration Page
Figure 22.
the TLP 710 default web
Power on a computer that is connected to the same network as the touchpanel.
Install the Extron Firmware Loader utility onto the computer if it is not already present.
This is on the software disc that ships with unit or can be downloaded, free of charge,
from the Extron website (www.extron.com).
To install from the disc, insert the disc into the DVD drive of the computer and follow
the same procedure as
Installing GUI Configurator and Global Configurator
page 18).
To install from the Extron website (www.extron.com), select the
then the
tab. Locate the Firmware Loader and click
Software
on-screen instructions to complete installation.
TLP 710MV and TLP 710TV • Configuration Software
. For more detailed instructions,
Firmware Upgrade
on page 23.
Volume settings
(see page 15) in the on-screen menus.
Extron Firmware
page, or using
GUI
Configurator. Before starting,
Main
Loader,
(see
tab and
Download
. Follow the
Download
21
Advertisement
Table of Contents
