Appendix 1-2 Replacement Of The Fr-A200 <Excelent> Series; Instructions For Installation - Mitsubishi Electric FR-A720-0.4K Instruction Manual

(5) Main differences and compatibilities with the FR-A500(L) series
Item
Control V/F control
method Advanced magnetic flux vector control
Added
functions
PID action set point setting
PID control
(Pr. 133)
Intelligent
mode Pr. 60
selection
Number of motor poles
Motor poles
(Pr. 81 , Pr. 144)
Changed
functions
User group 1 (16 parameters), User group 2 (16
User group
parameters) (Pr.160, Pr.173 to Pr.175)
Performing the parameter clear or all parameter
Communication clear (H5A96 or HAA99) from the DeviceNet
option communication option (FR-A5ND) clears the Pr.
345 and Pr. 346 settings.
User initial
value setting Available
(Pr. 199)
Deleted
Long wiring
functions Pr. 240 setting 10, 11
mode
Program
Pr. 200 to Pr. 231
operation
Terminal block Removable terminal block
PU FR-PU04, DU04
Plug-in options
Computer link, relay output option
FR-A5NR
· FR-A720-0.4K to 90K, FR-A740-0.4K to 7.5K, 18.5K to 55K, 110K, 160K are compatible in mounting
Installation size
· Heatsink protrusion attachment is not compatible.
Appendix 1-2 Replacement of the FR-A200 <EXCELENT> series

Instructions for installation

• When using the mounting holes of the FR-A200(E) series, FR-A5AT (intercompatibility attachment) is necessary.
FR-A500(L)
dimensions.
For the FR-A740-11K, 15K, an optional intercompatibility attachment (FR-AAT) is necessary.
Also, the panel cut dimension of 3.7K or lower, 200V class 30K, 55K or higher, 400V class 11K, 15K, 75K
or higher is not compatible.
V/F control
Advanced magnetic flux vector control
Real sensorless vector control
Vector control
(used with a plug-in option FR-A7AP/FR-A7AL)
Addition of "9999" to PID action set point (Pr. 133)
setting
(a value input from terminal 2 is a set point)
Parameter number change
(Pr. 60 Energy saving control selection)
(Pr. 292 Automatic acceleration/deceleration)
Setting the number of motor poles in Number of motor
poles (Pr. 81) automatically changes the speed setting
switchover (Pr. 144) setting.
User group (16 parameters) only
Setting methods were partially changed
(Pr.160, Pr.172 to Pr.173)
Performing the parameter clear or all parameter clear
(H5A96 or HAA99) from the DeviceNet communication
option (FR-A7ND) does not clear the Pr. 345 and Pr. 346
settings.
Not available
Substitutable with the copy function of the operation
panel (FR-DU07)
Setting is not necessary
(Pr. 240 settings "10" and "11" were cleared)
Function was cleared
Removable terminal block
Upward compatibility (FR-A500 terminal block
mountable)
FR-PU07
FR-DU07
FR-PU04 (Some functions, such as parameter copy,
are unavailable.)
FR-DU04 unavailable
Dedicated plug-in option (incompatible)
Built into the inverter
(RS-485 terminals, relay output 2 points)
FR-A700
465