SATO E series Programming Manual page 83

Printer Output
Special Notes
Page 2-66
1. The value specified for Print Quantity should be equal to the
number of different sequential values desired multiplied by the
number of repeats specified.
Example:
To print 2 sets each of the numbers 1001-1025 on separate
labels, we need 50 total labels. The commands would be as
follows:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>F002+001<ESC>XM1001
<ESC>Q50 <ESC>Z
2. It is necessary to specify the print position for each sequential
field on a label.
3. Up to eight different sequential fields can be specified per label.
4. This command ignores alpha characters in the sequential num-
ber field.
5. This command can not be used with the following commands:
Copy Image
Reverse Image
Line Feed
Section 2: Command Codes
SATO Programming Reference