Cr/Lf Delete - SATO E series Programming Manual

Section 6: Configuration Commands
COMMAND STRUCTURE
COMMAND FUNCTION
PRINTER INPUT
PRINTER OUTPUT
Special Notes
Page 6-12

CR/LF Delete

<ESC>CLa
a = 0 Do not delete CR/LF
1 Delete CR/LF
Example: <ESC>CL0
Placement: In a separate data stream before label data is
transmitted.
Default: a=o
To remove CR/LF commands from the dat stream.
<ESC>A
<ESC>CL0
<ESC>Z
There is no printed output as a result of this command.
1. This command can also be set using the LCD panel. The last setting
received, whether it is via this command or manually input via the LCD
panel will be active.
SATO Programming Reference