SATO E series Programming Manual page 154

Appendix A: Command Code Quick Reference
Instruction Description
Laabb Character Expansion. Expands characters in both directions.
M Font type. Specifies the 13W x 20H dot matrix font (including
descenders).
OA Font type. Specifies the OCR-A font.
OB Font type. Specifies the OCR-B font dot matrix.
Paa Character Pitch. Designates the number of dots between characters.
aa
PR Fixed Font Spacing. Returns the printer to fixed character spacing
mode.
PS Proportional Font Spacing. Places the printer in the proportional
character spacing mode. Will not work with U Font.
Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa
RDabb,ccc, Font Type. Specifies the internal AGFA raster fonts.
ddd,nn...n
nn..n
RMaaaa,bbbb Mirror Image. Prints mirror image of data. Must be preceded by an A1
Media Size Command. Must be preceded by an <ESC>A1 Media Size
command.
S Font type. Specifies the 8W x 15H dot matrix font (including
descenders).
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printerís volatile memory. See Kab90cc to
recall the character for printing.
Page A-6
b = Indicates the format that data stream was stored in
B Binary
H Hexadecimal
cc = Memory location where the character was stored.
Valid locations are 21 to 52 or "!" to "R" in hex values.
aa = Multiple to expand horizontally (01-12)
bb = Multiple to expand vertically (01-12)
= Number of dots between characters (01-99)
= Total number of labels to print for the job (000001-
999999)
a = A Specifies CG Times font
B Specifies CG Triumvirate font
bb = Always 00
ccc = Horizontal Size (16 to 999 dots or P08 to P72 point
size)
ddd = Vertical Size (16 to 999 dots or P08 to P72 point size)
= Data to be printed
a = 1 16 x 16 matrix
Page
SATO Programming Reference
2-14
2-26
2-26
2-26
2-16
2-18
2-18
2-55
2-28
2-47
2-26
2-12