Zero Slash - SATO E series Programming Manual

COMMAND STRUCTURE
COMMAND FUNCTION
PRINTER INPUT
PRINTER OUTPUT
Special Notes
SATO Programming Reference

Zero Slash

<ESC>LHa
a = 0 Print zeroes without slash
1 Print zeroes with slash.
Example: <ESC>LH1
Placement: .In a separate data stream before any label data is
transmitted.
Default: a=0
To allow printing of numeric zeroes with a slash.
<ESC>A
<ESC>LH0
<ESC>Z
There is no printed output as a result of this command.
1. This command can also be set using the LCD panel. The last setting
received, whether it is via this command or manually input via the LCD
panel will be active.
Section 6: Configuration Commands
Page 6-13