Initialize - SATO E series Programming Manual

Section 4: Expanded Memory Commands
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 4-16

Initialize

<ESC>BJFaaaaaaaa
aaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsatocard
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default: None
This clears all of the data from Expanded Memory in the specified
memory area and prepares the area to accept data.
<ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC>Z
There is no printer output as a result of this command.
1. You must have the optional Expanded Memory to use this com-
mand. Call your local SATO representative for information.
2. All Expanded Memory must be initialized before it can be used for
the first time.
3. Care should be exercised when using this command as it destroys
any data previously written to the card. It will clear all data from the
card and assign the new ID ("satocard" in the above example).
SATO Programming Reference