SATO E series Programming Manual page 157

Instruction Description
aaaa
bbbb
& Store Form Overlay. Stores a specified label image in the printer's
volatile form overlay memory.
/ Recall Form Overlay. Recalls the label image from the printer's
formoverlay memory for printing.
0 (zero) Replace Data (Partial Edit). Provides the ability to replace a specified
area of the previous label with new data.
*a Clear Print Job(s) and Memory. Clears individual memory and
buffers.
@,nnnn Off-Line. Signals the printer to go off-line after the completion of a print
job.
nnnn
~aaaa Cut Job. Cuts labels at a specified interval in a print job. Number of
labels printed is equal to the product of the Quantity specified times the
value of aaaa.
aaaa
~Aaaaa Cut. Specifies the number of labels to print between each cut. It is
independent of the Quantity command.
aaaa
~B Cut Last. Cuts any printed labels that remain in the printer
INSTRUCTION DESCRIPTION PAGE
SATO Programming Reference
Appendix A: Command Code Quick Reference
= Horizontal length in dots of area to be reversed.
= Vertical height in dots of area to be reversed.
a = When not included in command, clears print jobs in
Multi-Buffer mode.
a = If included in command, specifies memory section to
be cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
= Optional message to be displayed on the LCD panel.
Maximum of 32 characters.
= Number of labels between each cut (0001 to 9999)
= Number of labels between each cut
Page
2-35
2-34
2-58
2-19
2-48
2-24
2-23
2-25
Page A-9