Initialize - SATO CL412E Operator And Technical Reference Manual

Expanded Memory Function
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CL Series "e" Printers

Initialize

<ESC>BJFaaaaaaaa
aaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsatocard
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default: None
This clears all of the data from Expanded Memory in the specified
memory area and prepares the area to accept data.
BJFsatocard
There is no printer output as a result of this command.
1. You must have the optional Expanded Memory to use this
command. Call your local SATO representative for information.
2. All Expanded Memory must be initialized before it can be used for
the first time.
3. Care should be exercised when using this command as it destroys
any data previously written to the card. It will clear all data from
the card and assign the new ID ("satocard" in the above example).
PN 9001074 Preliminary
Section 5. Programming Reference
Page 5-101