Upgrade Ata Software - AT&T Synapse Installation Manual

Upgrade ATA Software

If you have system settings that you want to retain, back up the settings before upgrading the system software.
To upgrade the ATA software to the latest version:

Figure 68. Upgrade
Software
Getting Started
Synapse Installation Guide
1. Press /
to display the Configuration menu, as shown in Figure 68.
to highlight Upgrade Software and press
2. Press
upgrade process. The device initiates a link to the Synapse software updates web site host
and any new software.
If a host cannot be found or the server name cannot be resolved, Timeout or Host

Not Found appears. Upgrade the software from the PC, which can offer more
information about connection issues. See
software version:" on page
If the host is found, but there is no new software available, then the No New Version

message appears.
If the device is sluggish or unresponsive during the upgrade process, see
device becomes sluggish or unresponsive during or immediately after software
upgrade." on page
in the ATA Main menu until Configuration is highlighted and press
"To manually update a device to the latest
138.
171.
78
to initiate the software
"A Synapse