Synapse Installation Guide
ATA Settings
Use the WebUI to configure the two FXS ports on the ATA. Once an ATA is connected to the Synapse network, the WebUI is
updated to show all ATA-related menus and configuration items within menus. (The ATA must be running a compatible software
version.) If the ATA is deleted (using the WebUI's Modify Device page), all these ATA-related menus and configuration items
disappear. However, the device list continues to show a count of ATAs.
Using the Private Line Automatic Ringdown (PLAR) feature, you can create a private intercom line or an emergency line. When
you enable the PLAR feature through the WebUI, an analog telephone or device connected to an ATA FXS port will ring a
destination when it goes off hook. The destination can be an extension or, if using Call Appearance mode, a ring group. You can
configure this destination on the ATA Settings page of the WebUI.
During a call, a Deskset user can press dial-pad keys to transmit DTMF tones (touch tones) to the analog device. The DTMF tones
can control a door relay or other function. This feature depends on your analog device; you cannot program an entry code through
the ATA.
System Configuration
115