Ata Front Panel Interface - AT&T Synapse Installation Manual

ATA Front Panel Interface

You can access basic information and perform some configuration tasks using the ATA front panel. These tasks are easier to do
using the WebUI. See "The Web User Interface (WebUI)" on page
The ATA displays the Idle menu after powering up. Access the ATA Main menu to perform the system operation functions. The
Idle screen is different, but the menus are the same as that of the PSTN Gateway.
 30 )HE
$7$  
6\QFKURQL]HG
,3  
Figure 65. ATA Idle Screen
Device Information
Netw ork Status
Configuration
Netw ork Status
IP Address: (DHCP)
192.168.0.100
Figure 66. ATA Menu Screens
Getting Started
Synapse Installation Guide
To access the ATA Main menu from the Idle screen, as shown in Figure 65, press the
key. The menu provides the following functions:
Device Information

Network Status

Configuration

Press the key to highlight an entry, then press
your ATA or your network, as shown in Figure 66. Select Configuration to view or
modify some ATA settings. Here is the information you can see in Device Information and
Network Status:
Device Information
Model #

Serial #

Boot Version

Software Version

Firmware Version

76
89.
Network Status
IP Address

Subnet Mask

Default Gateway

DNS Server X

MAC Address

Network Port

Local Address

to see information about